Pagoda conference room power hub

Download Datasheet

PAGODA is a stylish new solution from OE for supplying user-accessible AC power, USB charging, data, and AV connections to the conference table. Our conference room power hub includes:

  • Stylish on-surface design
  • Through-desk power mount
  • Choice of AC power sockets & Data solutions
  • LED accent lighting options
  • Easy to clean and maintain


Not just stylish and functional but quick to install; PAGODA simply mounts via a standard 80mm grommet hole. Its high-quality finish defines PAGODA; the single-piece curved top available in brushed stainless steel sets it apart.

Specify PAGODA with one of our LED accent lighting options for an even more distinctive look.

As standard PAGODA is supplied with 2 x 4 gang POWERUNITS and 3 keystone apertures for data&AV in each end of the unit. Blank ends are available if data and/or AV are not required.


Technical Info


Populate PAGODA’s eight apertures with any combination of:
– 53mm power sockets, or
– TUF-R A+C 25W USB charger, or
– Data/AV


Body – Steel
Top frame – Steel


Standard – Brushed stainless steel top plate, & black fascias, or
White top plate, & gray fascia, or all black (NEMA TR sockets – black only)

Power and cord:

PAGODA is wired as standard with a 32” 14/3 SJT cord to a male GST connector to be used with OE’s pluggable GST system.
Available by special order wired with a NEMA 5-15 cord and plug.
A starter cord is required for GST option: 72” or 108” 14/3 SJT cord with female GST connector, NEMA plug, and Integral OCP standard.


As well as soft-wired power, PAGODA can accommodate soft wired data.
Using high quality in-line couplers with interchangeable system leads (or punch down sockets for site installed data) data cables can be changed “on-site” to suit individual office desk layout.
Where keystone sockets are ordered, our unique range of keystone adapters allow data outlets to sit flush and be color coded for easy circuit identification.

LED accent lighting:

Optional red, blue or green 12V LED strips with internal LED driver.


PAGODA fits into a standard 3.15” (80mm) grommet hole in table tops up to 1.38” (35mm) deep, using the supplied clamp 80 kit. Silicone rubber feet prevent damage to table surfaces.

Quality and Testing:

All PAGODA units are manufactured using ISO9001 quality controlled components and practices and are 100% inspected before shipment.

• Visual: Configuration and appearance
• Power sockets: Continuity, polarity, insulation & grounding
• TUF-R A+C 25W USB charger: Fully function tested, as well as 4 hour “full-load” soak tested”
• Data & AV: 100% continuity tested; all orders are batch tested for performance compliance

“we test every pin in every socket in every module”


cETLus Listed – UL962A/CSA22.2
International certifications available on request.


Cutout Dimensions:


Pagoda Datasheet

Pagoda Installation Instructions

Pagoda Sell Sheet

Pagoda 3D Model

Modular Components