The ARC-H sub-surface wireless charger offers the ultimate in charging convenience. Designed with a charging range of .78-1.18” (20-30mm), ARC-H can be installed without the need to cut into work surfaces.
10 Watts of charging power
Supports Samsung 10W and Apple 7.5W fast charge
No finished surface cutting required
Surface thicknesses .78-1.18” (20-30mm)
LED charging status indicator
OE’s patented design uses a resonant coil to focus the energy field and provide maximum efficiency and the fastest possible charging speeds.
ARC-H has been designed for the easiest of installations. It’s as simple as tab A into slot B. Affix the charger to the underside of your surface with the four screws supplied. And, locate the resonator pad on the work surface using the magnetic alignment tool, Done!
Providing 10 Watts of charging power ARC-H is among the fastest wireless chargers on the market! Keeping in mind it’s also a sub-surface charger! ARC-H is great for touch and go charging or if you’ve got a couple of minutes a full charge.
No under desk routing for surfaces up to .78”-1.18” (20-30mm). Thicker surfaces require under desk routing to comply with FCC requirements.
FCC part 15 (when installed under surfaces 20-30mm (0.78”-1.18”) thick)
ETSI EN 301 489-1 V2.2.0 (2017-03)
ETSI EN 301 489-3 V2.1.1 (2017-03)
ETSI EN 303 417 V1.1.1 (2017-09)
Resonator Pad and the ARC-H (LD) Body are RAL 7012 Basalt grey
In the box:
1 x ARC-H (LD),
1 x Power Adapter with 59” (1.5m) lead and NEMA, UK, Euro 2 pin, and Australian/Chinese plugs
1 x Resonator pad,
1 x Alignment Magnet,
1 x Alignment Template,
3 x Cable Clips,
1 x Installation Manual